The Wall Mounted Wrist Strap and Footwear Tester with AC switch for external Door Lock was designed to provide low cost alternative to assure presence of properly protected personnel in ESD safe areas. The AR-8DL Control unit has built-in AC switch which can handle up to 4A of current. The switch can be pre-programmed to close the door lock circuit in one of three possible modes of operation:

• Mode A: when the wrist strap test is within the specifications limits and checks "pass"
• Mode B: when footwear (heel strap) is within the specifications limits checks "pass"
• Mode C: when both wrist strap and footwear are within the specifications limits and both check "pass"

• Two in one instrument to check both wrist straps and footwear.
• Extremely easy to use. Just move your finger from wrist strap button to footwear button to complete the test (without a need to remember to change a position of an additional switch from one measurement to the other like with other manufacturers units).
• Built using SMT technology for reliability.
• Microprocessor controlled for accuracy.
• Dependable and simple.
• Pass tone is easy to hear.
• Visual indicators to show pass, low or high fail and low battery condition.

The wrist strap and footwear tester system was created to fill a growing demand for a dependable, low cost and easy-to-use test mechanism for personnel grounding devices. It is available as AWM-8DLUS Tester, (U.S. standards) a 750-kohms to 10-Mohms range for wrist straps and 750kohms to 100Mohms range for footwear and AWM-8DLE Tester (European standards) a 750-kohms to 35-Mohms range for both wrist straps and footwear.

• AR-8DL Wrist and Footwear Tester with built-in AC switch and 9V battery
• AWM-WP - Wall mounted plate with test instructions
• AWM- FP - Foot plate
• A-FM9-0 - Zero ohms grounding wire
• Manual and Warranty Card