XMP-S1 Manual Pick and Place Machine Start-up Package Data Sheet
XMP-S Series Pick and Place Machines (Start-up Version), were design to offer budget solution for educational institutions teaching SMT manual assembly. The machines are fully ESD safe and capable to be used in small volume and prototypes production as well.
They are more delicate and offer a bit less comfort than XMP-300 professional machines.
But for those, who are on the budget for the quality equipment, the XMP-S Series machines are an excellent alternative.
The S series XMP machines have head design allowing left and right handed operation without any alternations. Also, unlike other manufacturers' machines, our XMP Pick and Place units were designed for ESD Safety and all subsystems are connected in the machines to a common ESD ground.
Typical applications of manual pick and place systems are Low Volume Assembly, Prototyping, Pre-production runs, Repair and Rework.
X-KAR XMP-S Series are offering the best price/performance ratio. This applies to all other X-KAR products.
XMP-S Series Machines Feature:
- Precise and smooth arm movement all around the working area.
- Accommodate large boards up to 18" x 12" (457 x 305 mm). Wider boards can be rotated 180 degrees to place the components on the boards which width exceeds 12” (305mm).
- Illumination system mounted on an arm focusing light in working area - both during pick-up of a component and the placement on a board is included in the standard package.
- Two rotation/motion control knobs allowing operation by both right and left-handed operators
without any alternations.
- Fully Antistatic. It is supplied with AML-LC (or AML-LC10) wrist strap and an ESD grounding wire. All subsystems are connected to a common ESD ground.
XMP-S1 System Package includes:
- XMP-S1 Pick and Place Unit
- Eight ESD safe component trays on two side mounted trays
- XFS-2 Footswitch
- XIL-S1 Illumination Module
- ESD safe loose component boxes with spring closure leads
A-BOX-4 one box, A-BOX3 two boxes, X-BOX-2 three boxes and X-BOX-1 four boxes
- XNS-S1 Needle/Cup Set (Three metal needles and three rubber vacuum pick-up caps
- X-MAG1 – Hand held magnifier to inspect accuracy of the placement
- AGW-6BA coiled grounding wire
- AML-LC Wrist strap with 6 ft. long coiled cord
- AVP-1 Hand held Vacuum pick-up pen.
- TS-Stainless steel, not magnetic tweezers
- A power cord
- A Manual and a Warranty Card
|
Technical Specifications |
|
|
Power Requirements |
110-120 V AC (315mA) or 220-240 V AC (160mA) |
|
Maximum placement area on the PCB |
18" x 12" (457 mm x 305 mm) |
|
Loose component trays |
Eight pieces, four on each side of the machine. ESD safe. Size 2”x 3 1/8” (80mm x 50mm) |
|
Vacuum Source |
Diaphragm pump. 240 mmHg |
|
Outside Dimensions |
24.6" x 19.8"x 9.8" (625mm x 500mm x 250 mm) |
|
Weight |
24lb (10,9 kg) |
|
Shipping package weight and dimensions |
20.9"x 20.9" x 8.2" (530mm x 530mm x 210mm) 29Ib (13 kg) |
Optional accessories
- XPT-LB - Left Side Bracket for feeders
- XPT-RB –Right Side Bracket for feeders
- XPT-8 - 8mm feeder
- XPT-12 - 12mmfeeder
- XT-S1/8 - Pack of 8 single compartment trays
- XNS-1 - Needle/cup set (3 metal needles and 4 different sizes of ESD cups)
- XCS-1 - Cup set (2 each of 4 sizes of ESD cups)
- A-BOX_- ESD safe loose component boxes A-BOX1, A-BOX2, A-BOX3 and A-BOX4
 |
Part Number | Description | Price USD |
||||
|---|---|---|---|---|---|---|---|
| XMP-S1-115 | Low Cost ESD Safe Manual Pick and Place System Starter package. Ideal for small businesses, universities and/or Technical Schools. Delivered ready to use with handful of accessories. THis buy is a bargain. XMP-S1 <...more info |
|