Bomir online Worldwide Distribution Network For SMT, LVA, and ESD Equipment View Shopping Cart USA
Phone: 570 842-4725
Fax: 570 842-4290
Cart: (Empty)
Basic Static Electricity Locator and Meter
Qty1 - 1920 +
Price$299.90$279.90

ESD Awareness! The First–Most Important Step

Everyone who needs to deal with Static Electricity knows that personnel training and knowledge of the phenomena is the beginning for Static Protection. Protection against something which CAN NOT BE SEEN.

But the most important issue is often overlooked; Detection and Measurement of STATIC FIELD.

We buy equipment like wrist strap/heel strap testers, ESD mats, Lab-coats etc., and forget about the Static Field Checker or Meter. Often, the opinion is that this is an expensive extra. It is not.

In reality, the tool to see and measure, to know the scale of danger of Static Electricity to be able to implement proportional to the danger preventive methods is just around the corner.

ZeroCharge (Made by Monroe Electronics)  A-STAT-Check 289 Static Electricity Locator and Meter is the best priced Solution in the industry today, to see and measure Static Electricity.

 


Approve a complete Workstation in less than 30 seconds! The STATIC FLOOR TESTER is designed for fast, standard conformant (IEC 61340-5-1 / ANSI/ESD S20.20) testing of conductive floor coverings, table mat's, chairs and troll

Analyze electrostatic processes! The Static Visualizer is a 12-bit A/D converter with special software for the simple analysis of electrostatic processes.  All field strength meters and charged plate monitors with an analog output can be connected to it.

Non-Contacting Electrostatic Voltmeter

Universal Resistance Checker for surface, surface to ground and point to point measurments. Best value. Digital, microprocessor controlled. Does not require re-calibration. Pocket size, reliable ready to work with 5 Ib probes and the shoe testing probe.

A set of the hand probe and the testing plate to properly measure ESD shoes. Best value to test the shoes.

A set of two, 5 Ib probes as an accessory for A-400 Surface Resistivity Tester. They are intended for use to measure chairs, labcoats and ESD floor sections. Best price guaranteed.

Free Standing, One Touch Wrist Strap and Dual Footwear Tester

Micro Controlled. Superior Performance.


Free Standing, One Touch Wrist Strap and Dual Footwear Tester

Wall mounted, One Touch Wrist Strap and Dual Footwear Tester

Wall mounted wrist strap and footwear test station (U.S.A. Parameters). Best value. Digital, microprocessor controlled.

Wall Mounted Wrist Strap and Footwear Tester with AC switch for external Door Lock (U.S.A. Parameters). Best value. Digital, microprocessor controlled.

Wall mounted wrist strap and footwear test station with the solid state relay to open the door lock when personnel tested OK. Supplied with a complete hardware kit  for easy installation.

Wall mounted wrist strap and footwear test station with the solid state relay to switch the door lock and the complete hardware kit to install the ESD safe personnel entry control system.
We also carry out annual maintenance and calibration in Poland  (Calibration turn-around time: two days after receiving the unit). We issue calibration certificates.


Wall mounted wrist strap and footwear test station with a Magnetic Lock and a complete hardware set. An easy and efficient control of proper protection worn by personnel in ESD protected areas. Best value. Digital, microprocessor controlled.

Digital Precision Static Fieldmeter
Qty1 +
Price$479.90



Wrist strap and dual independent footwear tester

Wrist strap and dual independent footwear tester

Wrist Strap and Footwear Tester

Wrist Strap Tester

The AR-7 series Wrist Strap Tester are high quality, accurate and portable testing unit. The unit is available to test US or European grounding standards. Each meter has a large test button for easy along with a Visual and Audible indicator for pass/fail status.
Standard Features:

  • Built in SMT technology for reliability.
  • Microprocessor controlled for accuracy.
  • Dependable and simple.
  • Pass tone is easy to hear.
  • Visual indicators show pass, low or high fail.

Calibration Checker for AR-9U-American Standards.

Calibration Checker for AR-7 and AR-8  Wrist Strap and Footwear Testers.

AR-CAL.CHECK is a New Addition to our microprocessor controlled line of Wrist Strap and Footwear Testers. It provides the user of AR-7 or AR-8 Testers with a vehicle to test at his own facility the accuracy of calibration without the need of sending them to a manufacturer or a Distributor for periodic check.

Please see “more info” to find out how easy it is to verify if your Wrist Strap/Footwear testers are properly calibrated.


Single Wire Wrist Strap Ground Continuous Monitor

Single Wire Wrist Strap and Table Mat Continuous Monitor

Single Wire Wrist Strap and Table Mat Continuous Monito for 2 wrist straps and one mat (station grounding)

ACM1 Periodic Verification Unit
Qty1 +
Price$79.00

ACM2 Periodic Verification Unit
Qty1 +
Price$79.00

Dual Foot Plate
Qty1 +
Price$159.90

Stand
Qty1 +
Price$199.00
Part #: AR-ST

STANDARD RESISTIVITY TEST KIT (includes NIST Certificate)

PERSONAL WRISTSTRAP TEST PROBE AND PLATE
Qty1 +
Price$95.00

PERSONAL FOOTWEAR TEST PROBE AND PLATE
Qty1 +
Price$90.00

MINIATURE PROBES AND CORD
Qty1 +
Price$250.00

TWO 5 LB RESISTANCE PROBES
Qty1 +
Price$144.00

GROUND/CIRCUIT TESTER
Qty1 +
Price$25.00

GARMENT CLIPS (2)
Qty1 +
Price$65.00

ECONOMY COMBOTESTER (no software functions) & plate

DELUXE COMBOTEST KIT contains footplate and stand
Qty1 +
Price$1,910.00

Qty1 +
Price$575.00

CALIBRATION BOX, NIST
Qty1 +
Price$285.00

Get quote - Special Order. Please e-mail or fax at 570.842.4290 for pricing.