• Solid steel column with 9" of throat adjustment; longer columns are available
• 8" x 6" base with keyway for easy tool mounting
• Two-hand safety controls, filter/regulator and speed control
• 3.5" bore cylinder; 800 lbs. at 100 psi
• 3" stroke, double-acting cylinder
• Optional stroke lengths available
• Minimum press cycle is 1 second down and up using speed control
• Male rod threaded 3/4-16 x 1"
• Measures 16" x 10" x 23"
• Weighs 47 lbs.
• One-year warranty
• Optional electrical timing circuit to control downward dwell time from 1 sec to 500 hours. The ram stroke position that activates the timer is also adjustable. Part Number: BP-TM10.
• Ram on cylinder is polished stainless steel
• Minimum cycle time 2 sec.

  OPTIONS:
  Part Number	Description
  BPNR-500	Non-Rotating Ram
  BP-SC100	Round collar for die shank mounting, 1.5" diameter x 1" deep
  BP-HC100	Horseshoe collar for die mounting
  BP-HCT100	Standard "T" for use with horseshoe collar
  BP-TM10	Electrical timing circuit to control downward dwell time from 1 sec to 500 hours. The ram stroke position that activates the timer is also adjustable.

• 10" x 12" bed area with 8" throat and centrally located ram
• Rigid 'C' frame with 1" thick side walls to prevent flexing and allow for robotic loading
• Attractive blue enamel finish and hardcoat aluminum die plate with three sets of tapped holes for die mounting
• 4" stroke, 7.25" shut height
• Optional stroke lengths available
• Filter/regulator, manual shut-off and speed control
• Minimum press cycle is 1 second down and up using speed control
• Dual-palm controls
• Optional upgrade including front cover with counter and pressure gauge (P/N BP-1000U)
• Measures 18" W x 10" D x 26" H
• Weighs 73 lbs.
• Optional electrical timing circuit to control downward dwell time from 1 sec to 500 hours. The ram stroke position that activates the timer is also adjustable. Part Number: BP-TM10
• One-year warranty
• Ram on cylinder is polished stainless steel
• Male rod threated 3/4-16 x 1" for 5" cyl., 1 1/4 x 1 1/2 for 6" cyl.
• Minimum cycle time 2 sec.

• 16" W x 13 1/4" D bed area with 6" throat. Wider model is available with 22" W bed
• Centrally located ram with 1.5" x 1" shank collar
• 4" stroke standard, 7.25" shut height to ram
• Optional stroke lengths available
• Double-acting 5" cylinder (1 ton at 100psi), cushioned cap
• 6" cylinder (1.4 tons at 100psi) optional
• Speed control, filter/regulator, dual palm anti-tie-down
• Minimum press cycle is 1 second down and up using speed control
• Controls, counter and front-mounted air gauge
• Measures 17" x 13.5" x 27"
• Weighs 100 pounds
• Optional electrical timing circuit to control downward dwell time from 1 sec to 500 hours. The ram stroke position that activates the timer is also adjustable. Part Number: BP-TM10.
• Optional Non-Rotating Ram, BPNR-1000
• Ram on cylinder is polished stainless steel
• Male rod threated 3/4-16 x 1"
• Cycle time from 2 to 26 sec. depending on model

• Solid, rugged, compact arbor press produces ½ ton
• 9" x 10" base has 'T' slot with 'T' nuts for easy tool mounting
• 5" stroke with stroke limiter/stop; can be used in up or down mode
• 12" adjustable steel column
• 4" clearance from column to center of ram
• 12" steel handle provides easy leverage for the smallest operator
• 9" inside opening from base to ram
• Overall dimensions 9" x 10" x 24"; weight 32 lbs.
• Click here for the PDF Hand Press data sheet
• Click for Tonnage Calculations
• Click for Shear Strengths of Various Metals

Features:

• Programmable force, speed, distance, stop position, stop load, dwell time and more.
• Precision-ground ball screws and high-resolution servomotors to ensure repeatable accurary of +/-.005mm
• Seven models with optional load ranges from 100 kgf to 5000 kgf
• Can be configured for single-stage or multiple-stage pressing operations
• Interactive software and self-diagnosis functions
• RS-232C port for saving information on a PC (software not included)
• 32-bit processor plus feedback from built-in load cell and encoder
• 17 inputs and 16 outputs of pre-designated I/O
• Electro Press Series 4 Specifications

Features:

• Several optional drivers depending on your application
• Handles almost any torque requirements
• Quicher screw feeder and presenter
• Four models of three axis robots with work area to 500mm x 500mm
• Easy programming with remote pendant or software
• Handles almost any type of screw
• Fixtures and tooling available from Fancort
• Optional SCARA robots for in-line production
• Optional blow feed of screws for higher throughput